Paul INTJ, I live in southern Commiefornia. I am a firearms enthusiast, though it is hard in this state. I'm 21, I'm in college majoring in accounting. I'm a libertarian and an Atheist.

Send me some asks, get to know me!

21st August 2013

Photo with 5 notes

I stoned the engagement points on the hammer and sear, sanded everything with 1000 grit sand paper, then polished it all with a dremel tool. Lastly I replaced the trigger reset spring and plunger by doing the bobby pin trick. Next I’m gonna install a set screw in the plunger hole to stop trigger over travel. Then do the JB weld trick on the sear to get rid of the last bit of creep.

I stoned the engagement points on the hammer and sear, sanded everything with 1000 grit sand paper, then polished it all with a dremel tool. Lastly I replaced the trigger reset spring and plunger by doing the bobby pin trick. Next I’m gonna install a set screw in the plunger hole to stop trigger over travel. Then do the JB weld trick on the sear to get rid of the last bit of creep.

Tagged: fmj556x45

  1. glock-47-assault-machine posted this